This model's vape bar body style has been redesigned for a modern minimalist vibe. Pocket-sized, yet full of potential, you can enjoy potent puffs on the go while staying under the radar. Each colorway's shell is made from durable plastic; the heat-reactive Thermochromic Series has a special coating on the outside for a mesmerizing finish when in hand. Experience the comfort of the silicone mouthpiece, which is heat resistant and optimized for traveling. The auto-draw functionality keeps this vape at-the-ready for your enjoyment which is quite convenient for a quick toke anytime. Activating the unit and cycling through voltage settings can be done simply by a quick sequence of taps on the tactile button located on the bottom of the device.
The Pulsar APX Oil has a powerful 1000mAh battery to last through any weekend excursion! It is programmed with 5 voltage settings, 2 of which allow for lower temp draws to preserve those precious terpenes and provide a more flavorful experience. Amp up your clouds with the higher settings for a potent send-off into blissful satisfaction! The 15 second pre-heat function allows you to prime cartridges before inhaling, which is essential for preventing clogs to keep the hits coming smoothly.
View this device's battery life and selected voltage setting on the side digital display, and the additional puff counter makes regular dosing easy to keep track of. An LED light ring around the base will light up according to the color-coded voltage settings for instant visual heating confirmation. Once this unit is charged up, just screw in your 510 threaded cartridge of choice, attach the magnetic base, and you're ready to get lifted! Haptic feedback will confirm the base is attached correctly and upon selection of a pre-heating cycle or a voltage change. This unit has a built-in safety feature that shuts off the heat (but not the power) after 10 seconds of use to avoid overheating; it will only power off with the automatic short circuit protection.
Dimensions | |
Vaporizer | 3.46" x 1.85" x 0.79" (88mm x 47mm x 20mm) |
Maximum Cartridge Size | 0.57" x 2.36" (14.5mm x 60mm) |
What's in the box?
⚠️IMPORTANT: Be sure to read the manual fully before initial use and cleaning. Improper operation can lead to damaging the unit, voiding the warranty, and possible harm to the user. |
📂CLICK HERE TO DOWNLOAD: Pulsar APX Oil 510 Vaporizer Manual |
Pulsar APX Oil Bottom Magnetic Connector
These base connectors are an official replacement part for the Pulsar APX Oil 510 Vaporizer. The bottom connector attaches to the vape magnetically. Universal 510 threading works with most thick oil cartridges. Sold individually.
Details:
Pulsar APX eRig Glass Downstem
This downstem is an official replacement part for the Pulsar APX eRig. Made from borosilicate glass, this piece has a smoky gray color to make it really stand out from the base jar. Built into the end is a circular showerhead percolator for 360 degree diffusion and water-cooled hits. Sold individually.
Details:
Pulsar APX eRig Glass Mouthpiece
This mouthpiece is an official replacement part for the Pulsar APX eRig. Made from quality borosilicate glass, this mouthpiece is extra thick for durability and has a wide-rimmed design to ensure users get a good seal when inhaling. Sold individually.
Details:
Pulsar APX eRig Metal Airflow Tube
These stainless steel airflow tubes are official replacement parts for the Pulsar APX eRig. Durable in construction, these tubes are easily cleaned with a bristle brush after soaking in isopropyl alcohol. Sold as a 2 piece set.
Details:
Pulsar APX eRig Glass Base Jar
This base jar is an official replacement part for the Pulsar APX eRig. Made from thick borosilicate glass, the jar has an extra wide base design for surface stability. Printed on the bottom is one of Pulsar's logos, "Enjoy Higher Culture™". Sold individually.
Details:
Pulsar APX eRig Glass Coil Collar
This coil collar is an official replacement part for the Pulsar APX eRig. Made of quality borosilicate glass, this collar encases the atomizer to prevent heat loss or accidental burns while the rig is in use. It also allows the carb cap tether to fit securely on top. Sold individually.
Details: